BALBOA | 4.0 KW, 240 VOLT, 15" NO MOUNTING STUDS, WITH M-7 SENSORS | 58209
OPTIMUS # 9711-214 BALBOA # 58209 ******************************************************************************* GENERAL DESCRIPTION: THIS IS A 15", 2.25" DIAMETER STAINLESS STEEL FLOW THRU HEATER, M-7 STYLE, WITH 2" SLIP UNION TAILPIECES, USED ON THE 52531 SPACREST SYSTEM ******************************************************************************* BASIC SPECIFICATIONS: LENGTH: 15" (LENGTH OF TUBE ONLY FROM FLANGE TO FLANGE) DIAMETER: 2.25" ENDS: FLANGED WITH UNIONS WATTAGE: 5.5 KW, 240 VOLTS (1.4 KW AT 120 VOLTS) TAILPIECES: (2) 2" SLIP TAILPIECES, REPLACEABLE UNION NUTS, GASKETS (THREADS ON 2" UNION TAILPIECES ACTUALLY MEASURE 3-1/16" DIAMETER) (INSIDE DIAMETER ON 2" SLIP TAILPIECE IS ACTUALLY 2-3/8") ******************************************************************************* DETAILED DIMENSIONS: TO USE THESE DIMENSIONS, THE HEATER SHOULD BE PLACED WITH THE ELEMENT TERMINALS AT THE TOP AND WITH THE END CLOSEST TO THE ELEMENTS ON THE LEFT SIDE. WITH THE HEATER IN THIS POSITION THE MEASUREMENTS SHOWN ARE FROM THE LEFT HAND METAL FLANGE ALL OF THE ITEMS SHOWN BELOW ARE IN LINE WITH THE ELEMENT LEADS ON THIS HEATER AT THE TOP ELEMENT LEADS: (2) THESE ARE REPLACEABLE AND INCLUDE ELECTRICAL CONNECTER NUTS AND WASHERS 1ST LEAD 4-1/4" FROM FLANGE 2ND LEAD 5-1/2" FROM FLANGE THERMOWELLS: THIS HEATER USES M-7 SENSORS SO THERE ARE NO THERMOWELLS M-7 SENSOR MOUNTS: (2) THE M-7 SENSORS ARE MOUNTED IN THE M-7 SENSOR MOUNTS AND EXTEND INTO THE HEATER THE M-7 SENSOR MOUNTS HAVE MALE THREADS AND SCREW INTO THE FEMALE THREADS ON THE HEATER 1ST MOUNT 2" FROM FLANGE 2ND MOUNT 13" FROM FLANGE PRESSURE SWITCH TAP: NO TAPS MOUNTING STUDS: NO MOUNTING STUDS ******************************************************************************* REPLACEMENT PARTS: ELEMENT:` 5.5 KW, 240V, UNIVERSAL STYLE, WITH HARDWARE 9138-003 TITANIUM 9138-006 TEFEL COATED ***************************** M-7 SENSORS: REPLACEMENT SENSOR INCLUDES SENSOR, Oring, TOP MOUNTING NUT THE HEATER COMES WITH THE 30344 SENSORS BUT THESE ARE NOT AVAILABLE AS A REPLACEMENT. THESE HAVE A 12" CABLE, THE REPLACEMENT HAS A 24" CABLE 9711-101 REPLACEMENT SENSOR, NUT, Oring 9711-102 SENSOR MOUNT - THREADED BODY, MOUNTING NUT, Oring ***************************** UNIONS: 6227B 2" SLIP TAILPIECE 9711-213 SPLIT NUT WITH SCREWS 9175-40 GASKET, Oring, 2-15/16" DIAMETER
This product has a 1 year warranty from the manufacturer
