TRIODYNE | WHITE ADAPTOR WITH SCREWS | ADP-2800

TRIODYNE | WHITE ADAPTOR WITH SCREWS | ADP-2800

OPTIMUS # 3800-101 TRIODYNE # TSS-2800CS THIS IS COMPLIANT WITH THE ASME/ANSI A112.19.8-2007 REGULATIONS AS SPECIFIED BY THE VIRGINIA GRAEME BAKER POOL AND SPA SAFETY ACT THIS IS A VGB-2008 COMPLIANT COVER GENERAL DESCRIPTION: 8" ROUND RETROFIT MAIN DRAIN COVER, WHITE BASIC SPECS: CENTER TO CENTER SCREW HOLE MEASUREMENT: (4 DIFFERENT SIZES ARE POSSIBLE - SEE "SCREW HOLES" BELOW FOR MORE DETAILS ON THIS) 2 SCREW HOLES 7" APART (PRE-DRILLED) 2 SCREW HOLES 6-5/8" APART 2 SCREW HOLES 6-5/32" APART 2 SCREW HOLES 6" APART USAGE: APPROVED FOR FLOOR USE ONLY USE ON A NON-HORIZONTAL SURFACE IS NOT APPROVED SPECS: SPECS SHOWN ARE FOR A SINGLE UNIT FLOOR: 68.8 GPM @ 2.28 FPS LIFE: 7 YEARS TOTAL OPENING: 9.678 SQ INCH 45.245 GPM @ 1.5 FPS DETAILED DESCRIPTION: THIS IS KNOWN AS THE "ANTISNARE PLUS" COVER THIS IS AN ANTI-ENTRAPMENT RETROFIT COVER AND SCREWS THIS COVER DOES NOT HAVE A SINGLE SOLID CENTER TOP PIECE. THE COVER HAS A CIRCULAR OUTSIDE RING WITH 5 LARGE AND 5 SMALLER FINGERS WITH OPENINGS BETWEEN EACH. THESE NARROW AND SLOPE UPWARD TOWARD THE CENTER OF THE DRAIN. AT THE BOTTOM THESE EXTEND BELOW THE LARGE RING TOP RING. UNDER THE BOTTOM THESE START IN A SMALLER CIRCULAR RING WHICH EXTENDS BELOW THE TOP RING. MATERIAL: PLASTIC COVER , STAINLESS STEEL SCREWS COLOR: WHITE SHAPE: ROUND COVER DIMENSIONS: COVER OUTSIDE DIAMETER: 7-5/8" (A) (MAIN FLANGE RING) COVER BOTTOM RING DIAMETER: 5-5/16" THIS EXTENDS 1-1/4" BELOW THE BOTTOM OF THE MAIN FLANGE RING COVER TOTAL HEIGHT: 2-11/16" (B) MAXIMUM HEIGHT ABOVE MAIN DRAIN BODY: 1-7/16" SCREW HOLES: THERE ARE 4 DIFFERENT SETS OF POSSIBLE SCREW HOLES THE SCREW HOLES 7" APART ARE PRE-DRILLED AND COUNTER SUNK THE REMAINING 3 SETS HAVE COUNTER SINKS BUT ARE NOT PRE-DRILLED. MEASURED FROM CENTER TO CENTER OF SCREW HOLE THESE ARE THE 4 SETS 2 SCREW HOLES 7" APART (PRE-DRILLED) 2 SCREW HOLES 6-5/8" APART 2 SCREW HOLES 6-5/32" APART 2 SCREW HOLES 6" APART SCREWS: THERE ARE 7 DIFFERENT SETS OF SCREWS INCLUDED WITH THIS COVER THIS ALLOWS THE COVER TO BE USED WITH A NUMBER OF EXISTING DRAINS. 2 SCREWS - #12 x 1-1/2" SELF TAPPING 2 SCREWS - #12 x 1-1/4" SELF TAPPING 2 SCREWS - #10 x 1-1/4" SELF TAPPING 2 SCREWS - #10 x 3/4" SELF TAPPING 2 SCREWS - #10-24 x 3/4" MACHINE THREADS 2 SCREWS - #10-24 x 5/8" MACHINE THREADS 2 SCREWS - #8-32 x 1/2" MACHINE THREADS MARKINGS: TSS-2800C WHITE IS MOLDED INTO ONE OF THE LONG FINGERS ON TOP THE SPECS REQUIRED BY THE VGB-2008 LAW ARE ALSO MOLDED ON THE COVER